Anti-jamming X2MKT polyester film capacitor 222K factory sale

  • Type: Safety capacitor
  • Withstand voltage: 2100VDC(2S)
  • tanδ: ≤0.01 (20℃, 10KHz)
  • Size: 13.0*9.0*4.0*0.6mm
  • Application: General

Description

 Anti-jamming X2MKT polyester film capacitor 222K factory sale

The Anti-jamming X2Mkt polyester film capacitor 0.0022 is a non-inductive structure, which is made of metalized polyester film as the dielectric/electrode, and the lead is made of tin-plated copper-clad steel wire.

Anti-jamming X2MKT polyester film capacitor 222K factory sale

ltem Characteristics
Reference standard GB /T 14472(IEC 60384-14)
Climatic Category 40/100/21
Rated Voltage 250V/275VAC
Capacitance 0.0022~4.7μF
Capacitance Tolerance ±5%(J) ;±10%(K);±20%
Voltage proof 2100VDC(2S)
Dissipation Factor ≤0.01 (20°C, 10KHz)
Insulation Resistance

≥15000MΩ

20°C,1min

Size of X2-MKT Safety capacitor

X2-MKT Safety capacitor 222K
W: 13.0mm
H: 9.0mm
T: 4.0mm
D:0.6
P: 10.0mm

Product show

Application

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com