x1 x2 capacitor 822k 275vac factory Outlet

Description

x1 x2 capacitor 822k 275vac

x1 x2 capacitor.X capacitors are divided into X1, X2, X3, the main differences are:

1. The high voltage resistance of X1 is greater than 2.5 kV and less than or equal to 4 kV. The demand for this kind of capacitor is not too much, and it is expected to become a demand trend in the future

2. X2 withstand high voltage is less than or equal to 2.5 kV

3. X3 withstand high voltage is less than or equal to 1.2 kV

x1 x2 capacitor 822k 275vac

ltem	Characteristics
Reference standard	GB /T 14472(IEC 60384-14)
Climatic Category	40/100/21
Rated Voltage	250V/275VAC
Capacitance	0.0022~4.7μF
Capacitance Tolerance	±5%(J) ；±10%（K）;±20%
Voltage proof	2100VDC(2S)
Dissipation Factor	≤0.01 (20°C, 10KHz)
Insulation Resistance ≥15000MΩ	20°C，1min

Size of X2-MKT Safety capacitor

X2-MKT Safety capacitor 0.0082μF
W: 13.0mm
H: 11.0mm
T: 5.0mm
D:0.6
P: 10.0mm

Product show

Application

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.