Home/Film Capacitor/CL11 film Capacitor/Factory Outlet CL11 film capacitor polyester dielectric 400V

Factory Outlet CL11 film capacitor polyester dielectric 400V

  • Series: CL11
  • Capacity: 102J
  • Error: ±5% (J)
  • Application: General
  • Special services: bent feet, cut feet

Description

CL11 film capacitor polyester dielectric 400V

When the CL11 film capacitor is used as a bypass, it is mainly used to reduce the impedance of the DC bus and absorb the ripple current from the load, thereby effectively suppressing the fluctuation of the DC bus voltage due to sudden load changes.

CL11 film capacitor polyester dielectric 400V

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.001µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

20°C,1min

Size of CL11 102J400V Film Capacitor

Outline DrawingCL11 102J400V Film Capacitor
W:6.0mm
H: 11.5mm
T:4.0mm
P±1:4.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email:filmcap@xuanxcapacitors.com

Pho(whatsapp): +86-18825879082

Skype: Coco.PSH

Ask for More Details

Reviews

There are no reviews yet.

Be the first to review “Factory Outlet CL11 film capacitor polyester dielectric 400V”

Your email address will not be published. Required fields are marked *