Home/Film Capacitor/CL21 Film Capacitor/Factory direct sales film capacitor CL21 563J630V self-healing

Factory direct sales film capacitor CL21 563J630V self-healing

  • Type: Film capacitor
  • Withstand voltage: 1.6UR (2S)
  • Deviation: ±5% (J) ±10% (K)
  • Application: General
  • Structure: fixed capacitor

Description

Factory direct sales film capacitor CL21 563J630V self-healing

Factory direct sales film capacitor CL21 metallized polyester container has self-healing characteristics, that is, if there is a defect in the plastic film of the capacitor, it will break down when voltage is applied, and the metal film here will evaporate without short circuit. Make the capacitor still work normally.

Characteristic of 563J630V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 630V
Capacitance 0.056UF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥7500MΩ

20°C,1min

Size of CL21 563J 630V Film Capacitor

CL21 563J 630V Film Capacitor
W: 14.0mm
H: 13.5mm
T: 6.5mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapacitors.com

Pho(whatsapp): +86-18825879082

Skype: Coco.PSH

Ask for More Details

Reviews

There are no reviews yet.

Be the first to review “Factory direct sales film capacitor CL21 563J630V self-healing”

Your email address will not be published. Required fields are marked *