Home/Film Capacitor/CL21 Film Capacitor/Low Voltage Film Capacitor CL21 106J For Car Audio

Low Voltage Film Capacitor CL21 106J For Car Audio

  • CL21 Polyester Film Capacitor
  • 106J 630V Film Capacitor
  • Package: Bulk and Tape
  • Operating temperature: -55°C to 105°C
  • Can withstand 200 times of destructive charge and discharge
  • Capacitance Tolerance: ±5% (J)


Low Voltage Film Capacitor CL21 106J For Car Audio

Low Voltage Film Capacitor CL21 106J is a metalized polyester film (polyester) capacitor with excellent electrical performance, good reliability, high temperature resistance, small size, large capacity and good self-healing performance. It is suitable for bypass and coupling of DC and VHF level signals, and is widely used in filtering, low pulse voltage and other occasions.

Characteristic of 106J 400V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 1000nf
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance



Size of CL21 106J 630V Film Capacitor

Low Voltage Film Capacitor CL21 106J

CL21 106J 630V Film Capacitor
W: 30.5mm
H: 20.5mm
T: 12.5mm
P±1: 26.5mm


Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapacitors.com

Pho(whatsapp): +86-15015060214

Skype: Abby

Ask for More Details


There are no reviews yet.

Be the first to review “Low Voltage Film Capacitor CL21 106J For Car Audio”

Your email address will not be published. Required fields are marked *