Metal film capacitor CL11 683J160V special electronic toys

Description

Metal film capacitor CL11 683J160V special electronic toys

Metal film capacitor CL11 683J160V is small in size, light in weight, and the leads are directly spot-welded to the electrodes. It is widely used in electronic toy equipment

Characteristic of 683J160V Film Capacitor

ltem	Characteristics
Reference standard	GB6346 (IEC 60384-11)
Climatic Category	40/85/21
Rated Voltage	160V
Capacitance	0.068µf
Capacitance Tolerance	±5%(J)
Voltage proof	2UR (5S)
Dissipation Factor	≤0.01 (20°C, 1KHz)
Insulation Resistance ≥30000MΩ	20°C，1min

Size of CL11 683J160V Film Capacitor

Outline Drawing CL11 683J160V Film Capacitor
W: 12.5mm
H: 15.5mm
T: 7.5mm
P±1：7.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.