CBB81 capacitor 682J high quality environmental protection

  • Type: Film capacitor
  • Voltage: 1250V
  • Deviation: ±5% (J) ±10% (K)
  • Operating temperature range: -45~+105℃
  • Customized service: capacity, voltage, size, trademark

Description

CBB81 capacitor 682J high quality environmental protection

CBB81 capacitor 682J high quality environmental protection are ideally used in high-current, high-frequency, and high-pulse circuits, and are widely used in transfer switches, buffers, and electronic ballasts.

CBB81 capacitor 682J high quality environmental protection

ltem Characteristics
Reference standard GB 10190
Climatic Category 40/85/21
Rated Voltage 1250V
Capacitance 0.0068UF
Capacitance Tolerance ±5%(J) ;±10%(K)
Voltage proof 2.0UR (2S)
Dissipation Factor ≤0.001 (20°C, 1KHz)
Insulation Resistance

≥25000MΩ

20°C,1min

Size of CBB81 Film Capacitor

CBB81 682J 1250V Film Capacitor
W: 20.0mm
H: 14.5mm
T: 8.0mm
P±1: 16.0mm

Applications

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com