Home/Film Capacitor/CBB81 Film Capacitor/Factory wholesale polypropylene film capacitor CBB81 2000v Series

Factory wholesale polypropylene film capacitor CBB81 2000v Series

  • Type: Film capacitor
  • Capacity: 123J
  • Withstand voltage: 2UR (S)
  • Size: 33.0*28.0*16.0*0.8mm
  • Application: General

Description

Factory wholesale polypropylene film capacitor CBB81 2000v Series

Factory wholesale polypropylene film capacitor negative capacitance temperature coefficient; low loss, low internal temperature rise; low loss factor, high insulation resistance; designed for color TV line reverse circuit.

Factory wholesale polypropylene film capacitor CBB81 2000v Series

ltem Characteristics
Reference standard GB 10190
Climatic Category 40/85/21
Rated Voltage 2000V
Capacitance 0.012UF
Capacitance Tolerance ±5%(J) ;±10%(K)
Voltage proof 2.0UR (2S)
Dissipation Factor ≤0.001 (20°C, 1KHz)
Insulation Resistance

≥25000MΩ

20°C,1min

Size of CBB81 Film Capacitor

CBB81 123J 2000V Film Capacitor
W: 33.0mm
H: 28.0mm
T: 16.0mm
P±1: 27.5mm

Applications

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapacitors.com

Pho(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

Ask for More Details

Reviews

There are no reviews yet.

Be the first to review “Factory wholesale polypropylene film capacitor CBB81 2000v Series”

Your email address will not be published. Required fields are marked *