- Type:Metal foil type polyester film capacitor
- Capacitance: 224J
- Rated voltage: 50V
- Size: 10.5*12.0*6.0*0.5
- P: 7mm
CL11 green polyester capacitor 224J50V 0.22UF environmental protection polyester film P7MM
CL11 green polyester capacitor 224J 50V 0.22UF environmental protection polyester film P7MM
CL11 green polyester capacitor 224J50V 7mm pitch epoxy resin package, small size and light weight, can be applied to DC and pulsating circuits of various electronic instruments.
Characteristic of 224J50V Film Capacitor
|Reference standard||GB6346 (IEC 60384-11)|
|Voltage proof||2UR (5S)|
|Dissipation Factor||≤0.01 (20°C, 1KHz)|
Size of CL11 224J50V Film Capacitor
CL11 224J50V Film Capacitor
Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?
A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.
Q: How to judge the quality of the film capacitor?
A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.
2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.
3) Do simulated life test.