CBB21 400V polypropylene capacitor wholesale

  • CBB21 Polypropylene Capacitor
  • 273J 400V FILM CAPACITOR
  • 10mm
  • Capacitace Tolerance: ±5%(J)
  • Size(T*H*W): 5*10.5*13mm

Description

CBB21 400V polypropylene capacitor for energy saving lamps

CBB21 400V polypropylene capacitor, non-inductive structure,flame-retardant epoxy resin encapsulation, CP wire is led out radially. Low loss, low temperature rise, stable capacity,excellent insulation performance, and good self-healing characteristics.It is suitable for AC / DC and low-pulse circuits, and can be widely used in various electronic appliances such as display equipment, audio equipment, audio-visual equipment, communication equipment, and data transmission processing.

CBB21 400V polypropylene capacitor for energy saving lamps

ltem Characteristics
Reference standard GB10188(IEC 60384-13)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.027μF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR(2S)
Dissipation Factor ≤0.002(20℃,1KHz)
Insulation Resistance

≥100000MΩ

20°C,1min

Size of CBB21 273J 400V Film Capacitor

CBB21

CBB21 273J 400V Film Capacitor

W: 13.0mm
H: 10.5mm
T: 5.0mm
P±1:10.0mm

CBB21

CBB21

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com