Home/Film Capacitor/CBB21 Film Capacitor/682J 400V polyester film capacitor suitable for flashlight

682J 400V polyester film capacitor suitable for flashlight

  • CBB21 Polyester Film Capacitor
  • 682J 400V Film Capacitor
  • Package: Bulk and Tape
  • Size(T*H*W):4*8.5*13mm
  • Can withstand 200 times of destructive charge and discharge

Description

682J 400V polyester film capacitor suitable for flashlight

682J 400V polyester film capacitor is non-inductive structure, epoxy resin encapsulation, cp wire unidirectional lead, good self-healing performance, high insulation resistance, stable capacitance, suitable for DC and pulsating circuits, a wide variety of electronic appliances Filtering, blocking, coupling and noise reduction.

Characteristic of 682J 400V Film Capacitor

ltem Characteristics
Reference standard GB10188(IEC 60384-13)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.0068μF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR(2S)
Dissipation Factor ≤0.002(20℃,1KHz)
Insulation Resistance

≥100000MΩ

20°C,1min

Size of CBB21 682J 400V Film Capacitor

682J 250V film capacitor

CBB21 682J 400V Film Capacitor

W: 13.0mm
H: 8.5mm
T: 4.0mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapacitors.com

Pho(whatsapp): +86-13580107311

Skype: Hery

Ask for More Details

Reviews

There are no reviews yet.

Be the first to review “682J 400V polyester film capacitor suitable for flashlight”

Your email address will not be published. Required fields are marked *