CL21 film Capacitor 275J 100V large quantity favorably supplier

Description

CL21 film Capacitor 275J 100V large quantity favorably supplier

CL21 film Capacitor 275J is a non-inductive structure, made of metalized polyester film as the dielectric / electrode winding,

The leads are made of tinned copper clad steel wire and encapsulated with epoxy resin. Wide capacity range, small size, light weight; good self-healing, long life;

Suitable for DC isolation, bypass and coupling of DC and VHF level signals;

Mainly used in televisions, computer monitors, energy-saving lamps, ballasts, communication equipment, computer network equipment, electronic toys, etc.

Characteristic of 275J 100V Film Capacitor

ltem	Characteristics
Reference standard	GB7332 (IEC 60384-2)
Climatic Category	40/85/21
Rated Voltage	100V
Capacitance	2700nf
Capacitance Tolerance	±5%(J)
Voltage proof	1.6UR (2S)
Dissipation Factor	≤0.01 (20°C, 1KHz)
Insulation Resistance ≥1250S	20°C，1min

Size of CL21 275J 100V Film Capacitor

275J 100V large quantity favorably

CL21 275J 100V Film Capacitor
W: 24.5mm
H: 19.0mm
T: 10.5mm
P±1: 20.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.