CBB81 film capacitor 102j1000V factory sale

Description

CBB81 film capacitor 102j1000V factory sale

CBB81 film capacitor uses polypropylene film as the medium, metalized film and aluminum foil as electrodes, internal structure, flame-retardant epoxy resin encapsulation, and flame-retardant performance reaches UL94L-0.

CBB81 film capacitor 102j1000V factory sale

ltem	Characteristics
Reference standard	GB 10190
Climatic Category	40/85/21
Rated Voltage	1000V
Capacitance	0.001UF
Capacitance Tolerance	±5%(J) ；±10%（K）
Voltage proof	2.0UR (2S)
Dissipation Factor	≤0.001 (20°C, 1KHz)
Insulation Resistance ≥25000MΩ	20°C，1min

Size of CBB81 Film Capacitor

CBB81 102J 1000V Film Capacitor
W: 12.0mm
H: 11.0mm
T: 6.0mm
P±1: 9.0mm

Applications

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.