Home/Film Capacitor/CBB21 Film Capacitor/Polypropylene Film Capacitor 222j400V Wholesale Price

Polypropylene Film Capacitor 222j400V Wholesale Price

  • Type: metalized polyester film capacitor
  • Capacitance: 2.2nF(222)
  • Rated Voltage: 400V
  • Color: Orange red
  • Customized Service: Capacity, Voltage, Size, Trademark


Polypropylene Film capacotor 222j400v Wholesale Price

Metallized Polypropylene Film capacotor 222j400v, Non-Inductive Winding Structure, Low Loss, Low Temperature Rise, Excessive Current, Flame Retardant Epoxy Resin Encapsulation. Widely Used In High Frequency, DC, AC And Pulse Circuits In Electronic Ballasts, Switch Mode Power Supplies.

Polypropylene Film capacotor 222j400v Wholesale Price

ltem Characteristics
Reference standard GB10188(IEC 60384-13)
Climatic Category 40/85/21
Rated Voltage 400V
Capacitance 0.0022μF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR(2S)
Dissipation Factor ≤0.002(20℃,1KHz)
Insulation Resistance



Size of CBB21 222J 630V Film Capacitor


CBB21 222J 400V Film Capacitor

W: 19.0mm
H: 15.0mm
T: 15.0mm





Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapacitors.com

Pho(whatsapp): +86-18825879082

Skype: Coco.PSH

Ask for More Details


There are no reviews yet.

Be the first to review “Polypropylene Film Capacitor 222j400V Wholesale Price”

Your email address will not be published. Required fields are marked *