High quality CL21 capacitor 333J100V non-inductive film capacitor

  • CL21 Polyester Film Capacitor
  • 333J 100V Film Capacitor
  • Package: Bulk and Tape
  • Operating temperature: -55°C to 105°C
  • Can withstand 200 times of destructive charge and discharge

Description

High quality CL21 capacitor 333J100V non-inductive film capacitor

High quality CL21 capacitor 333J100V Reference Standard GB7332(IEC 60384-2), Electrode: Metallized Vacuum Evaporated Layer (With complexing jumbo-sixe Zinc and Aluminum). Enveloped with passive flammability Epoxy-resin (UL94-0) Using area: In AC brownout circuits. E. G In LED using. Features:  Small Size with good self-healing effect . Very low loss At high frequency , the low temperature in changing With high impact . Have well voltage proof features Under the high frequency AC current.

Characteristic of 333J 100V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 100V
Capacitance 33nf
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥3750MΩ

20°C,1min

Size of CL21 333J 100V Film Capacitor

High quality CL21 capacitor 333J100V

CL21 333J 100V Film Capacitor
W: 13.5mm
H: 10.0mm
T: 4.5mm
P±1: 10.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com