mylar caps CL11 333J 630V high dielectric constant sell

  • Type: Film capacitor
  • Capacity: 333J
  • Voltage: 630V
  • Tolerance: ±5%
  • Color: dark green

Description

mylar caps CL11 333J 630V high dielectric constant sell

mylar caps CL11 333J 630V high dielectric constant medium will generate induced charge and weaken the electric field when an electric field is applied. The ratio of the original applied electric field (in vacuum) to the final electric field is the permittivity, also known as the permittivity, Related to frequency.

mylar caps CL11 333J 630V high dielectric constant sell

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 630V
Capacitance 0.033µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance

≥30000MΩ

20°C,1min

Size of CL11 333J630V Film Capacitor

Outline DrawingCL11 333J630V Film Capacitor
W: 14.0mm
H: 20.0mm
T: 8.5mm
P±1:8.0mm

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

Reviews

There are no reviews yet.

Be the first to review “mylar caps CL11 333J 630V high dielectric constant sell”