Home/Film Capacitor/CL21 Film Capacitor/Filter CL21 Film Capacitor 105 250V For Car Audio

Filter CL21 Film Capacitor 105 250V For Car Audio

  • CL21 Polyester Film Capacitor
  • 105J 250V Film Capacitor
  • Package: Bulk and Tape
  • Can withstand 200 times of destructive charge and discharge


Filter CL21 Film Capacitor 105 250V For Car Audio

Filter CL21 Film Capacitor 105 250V is relatively wide, but relatively speaking, the volume is relatively small. However, its own advantages are great. It not only has good self-healing performance, but also has a long service life. Compared with ordinary capacitors, its life is more guaranteed.

Characteristic of 105J 250V Film Capacitor

ltem Characteristics
Reference standard GB7332 (IEC 60384-2)
Climatic Category 40/85/21
Rated Voltage 250V
Capacitance 1000nf
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR (2S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance



Size of CL21 105J 250V Film Capacitor

Filter CL21 Film Capacitor 105 250V

CL21 105J 250V Film Capacitor
W: 13.5mm
H: 10.5mm
T: 5.5mm
P±1: 10.0mm


Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapacitors.com

Pho(whatsapp): +86-18825879082

Skype: Coco.PSH

Ask for More Details


There are no reviews yet.

Be the first to review “Filter CL21 Film Capacitor 105 250V For Car Audio”

Your email address will not be published. Required fields are marked *