Home/Film Capacitor/CL11 film Capacitor/cl11 inductive polyester film capacitor 0.0027uf160v

cl11 inductive polyester film capacitor 0.0027uf160v

  • Nominal capacity: 2C272J
  • Tolerance: ±5%
  • Withstand voltage: 2UR (5s)
  • Encapsulation: epoxy resin encapsulation
  • Warranty: Unconditional replenishment


cl11 inductive polyester film capacitor 0.0027uf160v

The cl11 inductive polyester film capacitor is wound as the dielectric and aluminum foil as the electrode. The wire is made of tinned copper-clad steel wire, which is used in the DC pulsating circuit of TV sets and various electronic instruments.

cl11 inductive polyester film capacitor 0.0027uf160v

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 160V
Capacitance 0.0027µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance



Size of CL11 272J160V Film Capacitor

Outline DrawingCL11 272J160V Film Capacitor
H: 11.0mm


Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us


Pho(whatsapp): +86-18825879082

Skype: Coco.PSH

Ask for More Details


There are no reviews yet.

Be the first to review “cl11 inductive polyester film capacitor 0.0027uf160v”

Your email address will not be published. Required fields are marked *